Dec 13, 2017. #2. I had a wastegate problem with my 2001 2.8JTD Ducato. The pin the actuator moves had sheared off the wastegate for some reason. I got the local garage to weld on a new pin and it has worked fine since. You can unbolt the actuator and feel the wastegate open and close. It should move easily with one finger.
The Fiat Ducato is a light commercial vehicle developed by the Sevel joint venture between Fiat and PSA Peugeot Citroën, produced since 1981.It was also sold as the Citroën C25, Peugeot J5, Alfa Romeo AR6 and Talbot Express for the first generation, while the second and third generations were marketed as Fiat Ducato, Citroën Jumper, Peugeot Boxer and as the Ram ProMaster for the third

J’ai un c car Dethleffs monté sur fiat Ducato 2.8L 127 cv de 2004. Ma conso moyenne est située entre 9.4 L et 9.9L aux 100. soit environ 9.7L et je fais beaucoup de montagne. mais il est vrai

It should be possible to download a filter cross reference chart. However I chose to feed the quoted Fiat part number 1753740 into Ebay search function. This returned several offers for a COMLINE EOF056 which from the accompanying diagrams is a 3/4" UNF filter, measuring approx 110 x 145. You may be interested the following current offer on Ebay.

Kun autosi on 2,8 JTD siinä on yhteispaineruiskutus. Tästä seuraa, että siinä on myös sähköinen polttoaineen ohjausjärjestelmä. Jotkut nimittää sitä jopa tietokoneeksi. Ja kun autossa on sähköinen polttoaineen ohjausjärjestelmä siinä on myös vikamuisti, johon tallentuu poikkeamat asetetuista arvoista.
Points. 1. Jan 13, 2014. #1. Hi, I have recently purchased a fiat ducato 2.8 jtd 2004 motorhome with just under 55k on the clock. Shortly after buying it I noticed the oil level was higher than it should be so I drained some out to get it back to 'max'. All was well until recently the oil light has started flickering under light exceleration.
In order to replace the timing belt of the Fiat Ducato 2.8 JTD, the vehicle must be lifted so that the front right wheel and the relative wheel arch can be removed. This will allow access to the lower pulley, which will need to be loosened to reduce belt tension. Subsequently, accessing from the engine compartment, the pins of all the other vGqi2.
  • iqix2cuv9g.pages.dev/16
  • iqix2cuv9g.pages.dev/704
  • iqix2cuv9g.pages.dev/746
  • iqix2cuv9g.pages.dev/440
  • iqix2cuv9g.pages.dev/275
  • iqix2cuv9g.pages.dev/664
  • iqix2cuv9g.pages.dev/925
  • iqix2cuv9g.pages.dev/407
  • iqix2cuv9g.pages.dev/229
  • iqix2cuv9g.pages.dev/138
  • iqix2cuv9g.pages.dev/818
  • iqix2cuv9g.pages.dev/587
  • iqix2cuv9g.pages.dev/668
  • iqix2cuv9g.pages.dev/646
  • iqix2cuv9g.pages.dev/233

    • fiat ducato 2.8 jtd recenze